Equipments


DENTAMATIC 500 Chameleon MX

DENTAMATIC 500 Chameleon MX

DENTAMATIC 500 Chameleon MX is a fully automated vacuum furnace for drying and baking of ceramics with or without vacuum. This furnace is suitable for metal less working. Also the furnace is possible to be controlled from PC. As stand alone unit furnace can store up to 100 different programs. The furnace can be connected to Personal Computer (PC) where unlimited number of programs can be stored.



Features:-

  1. Automatic calibration after each program start
  2. programmable standby temperature
  3. vacuum control by time, temperature and both electronic vacuum level control
  4. long life quartz protected heater enameled steel chamber for better vacuum
  5. 100 freely programs
  6. power failure and runaway protection
  7. program protection against heater damage, in case of thermal sensor failure
  8. suitable for metal free ceramic and titanium operation in C to ° F
  9. very small work place only 225/225mm
  10. estimated life-expectancy of the muffle and the heater (quartz) - 10 years, if the temperature used is up to1000°C

Dentamatic 500 Chameleon MX Press

Dentamatic 500 Chameleon MX Press

Dentamatic 500 Chameleon MX Press is a microprocessor controlled vacuum furnace for all porcelain fused to metal, metal free crowns and press ceramic



Features:-

  1. Maximum temperature 1180°C
  2. Enamelled steel Chamber for better vacuum
  3. Programmable force and time for pressing
  4. estimated life-expectancy of the muffle and the heater (quartz) - 10 years, if the temperature used is up to1000°C.

Dentamatic 3000 Induction Casting Machine

Dentamatic 3000 Induction Casting Machine

Induction casting machine is a fully automatic used for casting all precious & non-precious metals except titanium.



Features:-

  1. Two microprocessor control
  2. Automatic casting and time control
  3. Low frequency melting and mixing of the metal thus avoids transmutation of metallographic properties
  4. Power IGBT modules
  5. High frequency generator up to 60Hz
  6. Automatic tests and protection

Burnout Furnace

Burnout Furnace

Induction casting machine is a fully automatic used for casting all precious & non-precious metals except titanium.



Features:-

  1. Heating elements covered with quartz protected tubes
  2. Maximum temperature 1360°C
  3. Programmable standby temperature
  4. Protection against thermocouple malfunction

Developed by Taksh Technology